DIGITEN Temperature Controller Wireless Thermostat Outlet Greenhouse Thermostat Wine Cooler Plug-in Temperature Controller Reptile Temperature Control Outlet Remote Control Tempreature Build-in Sensor

The wireless thermostat outlet will automatically turn on/off heating or cooling devices through your preset target temperature. Easy to set, control Cooling and Heating device, monitor rooms temperature.

• • 📡【Wireless Remotely Control】: Remotely programming the thermostat via the remote control. Communication range is 50-100m in open area.
  • 🕹️【Easy to Use And Program】: Plug-and -play design, handheld/wall mounted, which is more convenient and handy. Plug your heating or cooling device into the thermostat outlet, and you're ready to go. You can place the remote control in an ideal position to measure temperature for controlling heaters or coolers. Freely switch between ℃ and ℉. It can save all settings even if the power failure.
  • 💰【Save Money】: The thermostat will make your life not only comfortable but energy efficient. The thermostat turns on and off appliances connected to outlet based on the target temperature, thus saving money on your electric bill while maintaining comfort.
  • 💯【High Accuracy And Safe】: Built-in highly accurate temperature sensor, ambient temperature is detected automatically by remote controller. High and low temperature alarms are available, the maximum load can reach 12A, 1300W.
  • 🎈【Widely Used】: Widely used for greenhouse,mushroom house, reptiles breeding, pet feeding, wine cellar, cigar storage, home brewing, seed germination, fermentation, baby room, attic fan, swamp cooler, evaporative cooler, space heater, wall panel heater, electric fireplace heater, garage, rv, etc.
• • Load Capacity: 100-240VAC 12A, 1300W@110VAC, 2640W@220VAC
  • Remote Batteries Required: 2×1.5V AAA (Not Included)
  • Transmission Distance: 50-100m (Open Space)
  • Measuring Temperature Range: -10℃~80℃, 14℉~176℉
  • Temperature Accuracy: ±0.1℃/℉
  • High/Low Temperature Alarm: 0℃~80℃/32℉~176℉
  • Remote Refresh Frequency: 20 Seconds
  • Temperature Probe: Built-in The Remote
• * Please Note: Multiple sets of equipment will not interfere with each other, if you want one remote to pair only one outlet, when pairing, please remove the batteries from other remotes and keep only one remote control (the remote control you want to pair with) is in active (power on) state.
• • Directly connect to cooling or heating device after setting.
  • Set Run＞Stop, it will be in cooling mode.
  • Set Run＜Stop, it will be in heating mode.
• • Temperature is detected by the remote.
  • One remote can control multiple receivers.
  • The remote and receiver can be placed in an isothermal and open space within 50-100m.
• • The Low alarm and High alarm are not equal to the Run temperature and Stop temperature.
  • The High alarm and Low alarm are turned off by default.
  • To turn on the alarms, long press and hold the SET button, then press the DOWN/UP button to set the High/Low alarm velue you desire on the High/Low page.