Tire Auto Repair Machine Kit,Vulcanizing Machine Garage Equipment Vulcanizer Set with 8 Moulds,Garage Equipment DIY Tire Spreader Repair Tool Kit,Blue

Tyre repair methodClean and mark the surface of the wound where the tyre needs to be repaired.Grind the surface of the wound with a grinder over an area slightly larger than the wound.Using a brush, apply a good mortar (or hot glue) of raw rubber mixed with petrol evenly over the abraded area.Cut the appropriate size of raw rubber and fill the wound with it,Press the heating head on the raw rubber (if possible, put a thin layer of aluminium or iron sheet on the raw rubber), try to place the wound in the centre of the heating head, press the screws and fix the tyre.Turn on the timing switch and adjust it to the right position, refer to "20" for cold start (or adjust the curing time according to the temperature and wound), the hot start time can be a little shorter, if you don't need the timing can be adjusted to the manual gear on, and then the hot head starts to work.Product Information Input voltage: 110V 60HZ Heating plate power: 2×500W Automatic temperature: 170-180 (340F- 355F) Time range: 0-180 minutes Applicable tyre model: 5.7-7'' tyre Package Size: 22'' x 12'' x 11'' Shipping weight: 28 lbs.Packing List 1 x Tyre Patching Machine 8 x Moulds

• 【Sealed Tyre Repair】The high-capacity, fully rotating C-frame fits different wheel sizes and allows for vertical or horizontal repairs. The vulcanisation repair process cures the tyre patch and liner to form a dense, sealed repair job.
• 【Vertical/Horizontal Repair】 The large-capacity, fully rotatable C-frame accommodates different wheel sizes and allows vertical or horizontal repair.
• 【Easy to Operate】 Single person operation. No time-consuming tensioning belts required. Can handle long sidewall repairs. Cures patches and plugs simultaneously.
• 【[Adjustable】 The adjustable, swing-open, rotating C-frame cavity simplifies tyre loading and unloading while maximising stability.
• 【High Pressure Resistant】 Durable threaded handwheel bolts apply over 4,000 pounds of pressure and heat to maximise patch-to-casing adhesion. Energy efficient and cost effective, reducing operating costs.